Plascon Product Selection Guide

COMMON PROBLEMS & WATERPROOFING / ROOFS

THE PROBLEM

HOW TO FIX

THE SOLUTION

• All surfaces must be clean, firm and thoroughly dry before painting • Apply Plascon Multiseal (WSS 2) by brush or roller and build up to a thickness of 1mm in 3 coats, allowing 4 hours to dry between coats. • Finish with a chosen Plascon Nuroof colour

Roofs Water affected roofs in and around vulnerable areas, like bolts

apply

clean

finish

• All surfaces must be clean, firm and thoroughly dry before painting • Apply Plascon Roofseal (WRS 4), unthinned to primed surface • Immediately embed the Plascon Membrane into the wet coat of Plascon Roofseal (WRS 4) ensuring the membrane is thoroughly saturated by the coating • Immediately apply full coat of Plascon Roofseal (WRS 4) over the membrane • Allow 48 hours to dry before finishing with a chosen top coat

Roofs Leaks that require membranous waterproofing on and around roof flashing

apply

remove & clean

finish

Plascon Roofseal can also be used on parapets

remove & clean

finish

Made with