Plascon Product Selection Guide
INTERIOR / Feature Walls
What to use
Why it’s the best
HOW TO USE
A rich faux-suede finish.
Clean with water or Polycell brush cleaner
• It absorbs and reflects light, enhancing the rich textured and suede finish • A fashionable colour range ideal for feature walls • Water-based • Quick-drying, two coats can be applied in one day
Spread Rate: 10m 2 per litre
SUEDE APPLICATION: 1. Prepare your wall by applying Plascon Polvin tinted in a similar colour to your Suede product as your base coat. 2. Stir well with a flat paddle for 5 minutes before use. During painting, stir every 30 minutes to ensure these metal particles are mixed into the paint. 3. Once your base coat is dry you can start applying the Suede product.
4. Apply the first coat with a long nap roller , brushing all areas that cannot be reached by roller first. 5. To ensure a good film of paint avoid overspreading . 6. To achieve faux suede effect apply second coat with a good quality Professional brush (100mm), in random criss-cross strokes . 7. Hand pressure is important , if you press to hard you will end up removing all the suede effect.
TIP: Suede is slightly translucent and in order to create this three dimensional effect it requires two layers of Suede. Allow the first layer to dry thoroughly (4 hours drying time)
Made with FlippingBook